Vopa

VortHex

VortHex Instructions

VortHex Instructions

What's in the box?

It's time to open the box
VortHex
Adapter
Silicone Tube
Mighty: Long
Crafty: Short
Mouthpiece
Measure cup

Learn how to use it !

Better understand the ultimate experience

Before use - instructions

It's very easy to use it correctly
Fill the measure cup
with cold water

Max 30ml (1oz)

Pour water to the VortHex via the hole on the top
Make sure your vaporizer is not connected to VortHex
while you do it, water can damage your vaporizer
Insert your device to the VortHex
Slide your vaporizer to the VortHex
while the screen and controls are in the exterior side
Insert adapter
Inset the adapter to the hole on top
Connect to your device
connect the adapter to mouthpieces of your vaporizer
when the Vorthex is facing you the mouthpiece
should be in the right side.
Connect the tube to the side hole

You are ready!

Start to enjoy your new VortHex.
Don't forget to turn on your device. Use it carefully!

Important

• DO NOT rotate the VortHex upside down while connected to device
• DO NOT use the same water twice, water must be replace every use
• DO NOT blow air into the tube, this could cause damage to your device

After use - instructions

It's very easy to keep it correctly
Disconnect and unplug the adapter pull it out and unplug the long tube
Disconnect and unplug your device
Rotate it upside down to pour all the water left out from the VortHex
(Shake it to insure all waters went out)

Maintenance and Cleaning

Keep it clean and enjoy it

Cleaning - instructions

It's very easy to clean it correctly

Important Before Clean

You can use alcohol or Vopa Clean detergent to clean it.
•Do not let the alcohol or detergent to stay more the 10 minutes inside.
Disconnect and unplug the adapter pull it out and unplug the long tube
Disconnect and unplug your device
Rotate it upside down to pour all the water left out from the VortHex
(Shake it to insure all waters went out)
Pour 30ml (1oz) of Detergent/Alcohol into the Vorthex.
1/3 of the Vopa Clean Bottle.
Place your fingers over the top hole and side hole, and
block the holes tightly with your fingers
Shake the Vorthex for 1-2 minutes.
Pour the detergent out.
Rinse thoroughly with water inside and outside the VortHex.
check that no Alcohol/detergent left inside.
Then wait it to dry.

You are ready!

Continue enjoying your VortHex

FAQ - Questions and Answers

Let's understand more
Skip to content